The Quartz Hybrid Universal Nail puts a quartz deep dish on a Grade 2 titanium body. The titanium takes heat off the coil and holds it steady underneath, and your concentrate only ever touches quartz.

Two quartz dish inserts come in the box, so there is a spare on the shelf from day one.

🔧 Universal Means Four Fitments

Both adapters are included, male and female, each covering 14mm to 18mm. Four fitments on one nail, so it seats on almost any standard rig with nothing else to buy.

Running a 10mm rig? Add the 10mm Hybrid Nail Adapter, sold separately.

🔥 The Coil It Runs On

The nail works with the standard Hybrid Heater Coil, which wraps the bottom and the sidewalls.

It also fits the Flat Heater Coil, which heated from underneath and is no longer produced. If you still run one, the Shallow Quartz Dish Tops are the dish shape built for that setup.

🔄 Every Part Comes Apart

Dish, screw, heat spacer and both adapters are separate pieces. Chip a dish and you swap the dish, not the nail.

The body also accepts the other dish materials, so the same nail runs a Silicon Carbide Deep Dish or a Titanium Deep Dish whenever you want to change what the concentrate sits on.

⚙️ Specifications

• Quartz deep dish insert on a lab certified Grade 2 titanium body
• Fits 14mm to 18mm male and female glass joints
• 10mm rigs need the 10mm Hybrid Nail Adapter, sold separately
• Works with the standard Hybrid Heater Coil, and with the discontinued Flat style coil
• Every part interchangeable and individually replaceable
• Takes quartz, titanium and silicon carbide dish tops

📦 What's Included

• 2× Quartz Deep Dish Inserts
• 1× Titanium Screw
• 1× Titanium Heat Spacer
• 1× Titanium Male Adapter, 14mm to 18mm
• 1× Titanium Female Adapter, 14mm to 18mm

Nail only. A controller and heater coil are sold separately.

🎯 What It Pairs With

• Hybrid Heater Coil (Standard Size) - the standard coil for this nail
• Quartz Deep Dish 2-Pack - spare dishes in the same quartz
• Glass Cyclone Carb Cap - two ports that spin the air into a vortex
• Terp pearls - the vortex is what makes them spin
• 10mm Hybrid Nail Adapter - required for a 10mm rig, not included
• Dab Nails - the titanium and silicon carbide nails alongside this one

🧠 Pro Tips

• Recommended range is 500 to 600°F. Give the nail a few minutes to come up before the first dab of the session.
• Swab the dish while it is still warm. Quartz gives residue plenty to hold onto once it cools.
• Check the titanium screw every so often. Heat cycling loosens hardware, and a snug screw is what keeps heat moving from the body into the dish.
• Check your rig's joint before ordering. 14mm and 18mm are covered in the box, 10mm needs the separate adapter.
• Keep the second dish somewhere you will find it. The day you chip one is not the day you want to be ordering.