XL Quartz Hybrid Nail

The XL Quartz Hybrid Nail puts a 30mm quartz deep dish on a Grade 2 titanium body. The titanium takes heat off the coil and holds it underneath, and your concentrate only ever touches quartz.

The wider dish gives a dab more room to spread, so a larger load sits in a thinner layer across the quartz instead of pooling in the middle.

⚠️ Takes the 30mm XL Coil

A 30mm dish needs a 30mm coil. This nail runs with the XL Hybrid Heater Coil 30mm, and the standard-size coil will not reach around it.

Already running a standard coil? The Quartz Hybrid Universal Nail is the 25mm version of this nail.

🧩 One Body, Every Dish Top

Every MiniNail hybrid nail is built on the same body. This one, the Titanium Universal Nail, the Silicon Carbide Universal Nail and the XL Silicon Carbide Nail are the same hardware with a different dish top on it.

So the nail is not locked to the dish it arrives with. Change the top whenever you want, as long as your coil matches the dish size.

• 30mm dishes: XL Quartz Deep Dish and the XL Silicon Carbide Dish
• 25mm dishes, if you also run a 25mm coil: Titanium Deep Dish, Quartz Deep Dish, Silicon Carbide Deep Dish

🔧 Universal Means Four Fitments

Both adapters are in the box, male and female, each covering 14mm to 18mm. That is four fitments on one nail, so it seats on almost any standard rig with nothing else to buy.

Running a 10mm rig? Add the 10mm Hybrid Nail Adapter, sold separately.

⚙️ Specifications

• 30mm quartz deep dish on a lab certified Grade 2 titanium body
• Built for the 30mm XL Hybrid Heater Coil
• Fits 14mm to 18mm male and female glass joints
• 10mm rigs need the 10mm Hybrid Nail Adapter, sold separately
• Every part interchangeable and individually replaceable

📦 What’s Included

• 1× 30mm XL Quartz Deep Dish
• 1× Titanium Screw
• 1× Titanium Heat Spacer
• 1× Titanium Male Adapter, 14mm to 18mm
• 1× Titanium Female Adapter, 14mm to 18mm

Nail only. A controller and the 30mm XL coil are sold separately.

🎯 What It Pairs With

• XL Hybrid Heater Coil – 30mm – the coil this nail is sized for
• XL Quartz Deep Dish – a spare dish in the same quartz
• XL Flat Tip Dabber and Carb Cap – dabber and two-port cyclone cap sized for 30mm
• XL Heater Coil Guard – a shield around the 30mm coil
• XL Enail and Accessories – everything built around the 30mm size

🧠 Pro Tips

• Recommended range is 500 to 600°F. A wider dish spreads heat over more quartz, so give it the full warm-up before the first dab of the session.
• Swab the dish while it is still warm. Residue lifts out easily then and takes real work once it cools.
• Check the titanium screw every so often. Heat cycling loosens hardware, and a snug screw is what keeps heat moving from the body into the dish.
• Check your rig’s joint before ordering. 14mm and 18mm are covered in the box, 10mm needs the separate adapter.